Cura1 Wireless iBeam – PIR Sensor Beam Kit – In-Home Use

Description

This kit contains the Cura¹ Cordless iBeam and the choice of Cura1 receiver – See below for more information

Cura¹ Cordless iBeam – Curtain PIR Sensor Beam

The iBeam wireless Curtain PIR is designed to be affixed to the wall, either beside the bedhead or spanning across a doorway using a specialized swivel wall mount bracket. Its installation is a straightforward process, and the iBeam can be effortlessly relocated between rooms.

Equipped with an On/Off switch to preserve battery life during periods of non-use, the device also features a low battery indicator. Compatibility with other cura1 cordless devices enhances its versatility. For added convenience, an optional plug pack can be used to power the iBeam.

Technical Specifications:

• Detection range: 5m (approx*)
• Wireless range: 50m*
• Power supply: 6-12V DC, 300mA &/or 3 x AA alkaline batteries.
• Battery life: 6 months with normal usage
• Housing material: ABS plastic
• Dimensions (HxWxD): 78mm x 81.5mm x 38.5mm (includesbracket)
• Weight: 100g (not incl. batteries)
• Operating temp: -25°C to 55°C
• Relative humidity: <85%
• Standby current consumption: 1mA
• Alarm condition current consumption: 20mA
• Operating frequency: 433Mhz (TX) (Not supervised)
• Transmission strength: < 10mW

*Actual transmission and detection distances may vary and be dependent on specific environmental conditions.

Cura¹ Wireless Monitor

The Cura¹ Wireless Monitor has the ability to monitor up to 5 cordless pad/ mats or other Cura¹ cordless transmitters.
This monitor can be powered by 3 X AA batteries or plug-pack.
The CBM is a universal dual controller whereby it suits wireless bed, floor and chair sensors and has an adjustable audible alert.
The mobile capability allows for a carer to take the CBM on routine jobs or leave stationary at a nursing station within a 20-30m radius of the pads.

Cura1 Three Channel Cordless Falls Monitor

The Cura1 Three Channel Cordless Falls Monitor can monitor up to 3 cordless pad/ mats or other Cura1 cordless transmitters and 1 hard-wired Cura1 sensor.
3 X AA batteries or plug-pack can power this monitor.
The CBM-03 is a universal dual controller whereby it suits wireless bed, floor and chair sensors and has an adjustable audible alert.
The mobile capability allows for a carer to take the CBM on routine jobs or leave stationary at a nursing station within a 20-50m radius of the pads.

Cura1 LED pager

The Cura1 LED Pager is a portable paging unit which can monitor 3 Cura1 wireless devices such as Cordless Chair/Bed Exit pads, Cordless Floor Sensor Mats, Cura1 wireless help pendants, the iBeam Sensor and Door Reed Switches.